Operation of Hands-Free Phoning
Preparation : Only with the optional accessory KCA-BT300 or KCA-BT200 connected.
■
Press and hold to enter
Bluetooth mode.
■
Press to answer an incoming
call.
Getting Started
Before use the Bluetooth device, you need
to connect Bluetooth device to this unit. The
following 3 steps procedure is necessary.
Step 1. Pairing (Registering from Bluetooth
devices)
Press
SRC to turn on the power.
1
Start registering this unit by operating
2
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit (pairing). Select "KCA-
BT300" or "KCA-BT200" from the list of
connected units.
Input the PIN code ("0000") in the
3
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
"0000" as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 24).
By operating the Bluetooth device, start
4
hands-free connection.
18
English
LIST
UPDATE
■
Press and hold for about 2 seconds to memorize the
current phone number.
■
Press briefly to recall memorized phone number.
Step 2. Connection
Step 3. Hands-free phoning
■
When registering from this unit. Refer to
<Registering Bluetooth Device (Pairing)>
(page 22).
■
For details on the Bluetooth cell-phone with
the hands-free function, see <About the
Cell-Phone> (page 25).
If you have registered 2 or more cell-
phones, you need to select one of them.
For more details, see <Selecting the
Bluetooth Device> (page 23).
When a cell-phone is connected, the "BT"
indicator lights up.
You can do hand-free phoning when the
connection is made.