Operation:
Without temperature control:
XD, on 17/02/2020
ARATOS Plug-in
The ambient temperature sensor (see "3.2 First Use") is disabled:
Position [button D] on the flame symbol (diagram to left)
The "output indicators" corresponding to the selected Output Level should be on
as in the example "Output Level 3"
Choose the desired Output Level (1 to 5) with [button B]:
In this example "Output Level 3"
To turn off, press [button A] for 5 seconds:
"Power On LED" starts flashing
stove
dual
Page 26 sur
model P649000
41