K-FEE JAVA Pro Mode D'emploi page 99

1
Off
3 sec. min.
Firstly, switch o the machine.
Then hold the rinse button
down for at least 3 sec.
4
The cleaning symbol lights up
on the display.
7
For replacing the filter
hold the rinse button
down for more than 3 sec. and
follow the steps described on
page 19 from figure 5.
In order to return
to descaling, press
the rinsing button only
briefly.
2
The descaling symbol lights
up on the display.
5
For cleaning hold the
rinse button down for
more than 3 sec. and fol-
low the steps described on
page 15 from figure 5.
Press the rinse but-
ton only briefly to
start the next function.
8 8
Descaling symbol lights up
again (program loop).
3 For descaling hold the
rinse button down for
more than 3 sec. and fol-
low the steps described on
page 17 from figure 5.
Press the rinse but-
ton briefly to start
the next function.
6
The filter symbol lights up on
the display.
11 9
To leave the program loop
press the on/o button.
Cleaning, descaling and
filter replacement on
request
This function can be used to
start descaling or cleaning
or to carry out a filter change at the
operator's discretion.
The filter symbol will only
appear if the "water filter"
parameter has been set to "on".
EN
21