Renkforce C8416 Mode D'emploi page 55

Switching the alarm function on/off
Method 1:
• Push the button "TIME" (A5) several times until either the alarm time "AL1" or "AL2"
is displayed (D1), depending on which alarm time you want to switch on or off.
• Briefly push the button "ALARM" (A6) to activate or deactivate the desired alarm
function. When switching on the projection radio alarm clock will emit two beeps;
when switching off, it will emit one.
Method 2:
• Both alarm functions can be switched on and off in sequence as well.
• For this, the projection alarm clock must be in regular mode. Push the button "TIME"
(A5) several times until the date is displayed (C12).
• Briefly push the button "ALARM" (A6) several times, until the desired alarm time is
switched on or off. When switching on the projection radio alarm clock will emit
two beeps again; when switching off, it will emit one. When both alarms are off, the
following sequence will apply for every push of the button "ALARM" (A6):
alarm 1 on; alarm 2 on; alarm 1 and alarm 2 on; both alarms off;
The following applies to both methods:
• A small bell symbol will appear next to the minutes display, indicating which of the
alarm times is on:
D2
D3
D2+D3
No symbol
Alarm time 1 on
Alarm time 2 on
Alarm times 1 and 2 on
Alarm function off
55