And Troubleshooting - Edesa L836 Manuel D'installation Et D'utilisation

washing machine
Never open up the
appliance. There is no fuse
or similar component inside
that can be replaced by the
user.
Problems
No water coming in
Does not drain or spin-dry
Does not spin-dry
Does not start
Call the Technical Assistance Service
PROBLEMS
Why won't the washing
machine start?
Why is the washing machine
vibrating or making too
much noise?
safety and troubleshooting
If you detect any problems with your washing machine,
you will probably be able to rectify them yourself by
consulting the following instructions.
If this is not the case, unplug the appliance and contact
the TECHNICAL ASSISTANCE SERVICE.
Indicator
mod. with a screen
FO1
FO2
CO3
FO4
FO5
.
.
.
.
.
F10
This may be due to the following:
Check the door is properly shut.
The washing machine is not plugged into the mains or
there is no voltage in the mains supply.
The Start/Pause button has not been pressed.
If the washing machine door is not properly shut, F04 will
appear on the display or the wash and end pilot lights will
flash alternately.
This may be due to the following:
The blocking and transport screws have not been
removed.
The washing machine has not been correctly levelled.
87
Indicator
mod. without a screen
the wash and rinse pilot lights will flash alternately
the rinse and end pilot lights will flash alternately
the wash, rinse and end pilot lights will flash alternately while
all the other control panel pilot lights will remain off
the wash and end pilot lights will flash alternately
the wash, rinse and end pilot lights will flash,
together with one of the other control panel pilot lights