Publicité
EN
Problem
The appliance
does not heat
up.
The appliance
does not
produce any
steam.
Water droplets
drip from the
appliance
steamer head.
Possible cause
The appliance is not
plugged in properly
or not switched on.
The appliance is not
plugged in properly
or not switched on.
The appliance has
not heated up
sufficiently.
You have not
pressed the steam
trigger fully.
The water level in
the water tank is
too low.
Scales/calc are
formed inside the
appliance.
The steamer head is
placed horizontally
for a long time.
Solution
Check if the mains plug is
inserted properly and its
wall socket is working.
Check if the appliance is
switched on.
Check if the mains plug is
inserted properly and its
wall socket is working.
Check if the appliance is
switched on.
Let the appliance heat up
for 60 seconds ('steam-
ready' light flashes). When
the appliance is ready for
use, the light turns steady.
Press the steam trigger
fully for a few seconds.
Unplug the appliance and
refill the water tank.
Perform Decalc function
(refer to
section).
Place the appliance in an
upright position on a flat
surface after each usage.
25
Publicité
