Sony Cyber-shot DSC-HX400 Mode D'emploi page 19

Shooting still images/movies
Mode dial
: Intelligent Auto
: Movie
Shooting still images
1
Press the shutter button halfway down to focus.
When the image is in focus, a beep sounds and the z indicator lights.
2
Press the shutter button fully down to shoot an image.
Shooting movies
1
Press the MOVIE (Movie) button to start recording.
• Use the W/T (zoom) lever to change the zoom ratio.
2
Press the MOVIE button again to stop recording.
Notes
• Do not pull up the flash manually. This may cause a malfunction.
• When using the zoom function while shooting a movie, the sound of the camera
operating will be recorded. The sound of the MOVIE button operating may also be
recorded when movie recording is finished.
• The panoramic shooting range may be reduced, depending on the subject or the
way it is shot. Therefore even when [360°] is set for panoramic shooting, the
recorded image may be less than 360 degrees.
Shutter button
W/T (zoom)
lever
MOVIE
W: zoom out
T: zoom in
GB
GB
19