Dyson Supersonic HD04 Manuel D'utilisation page 6

6. This appliance has a non-
self resetting thermal cut-out
safety device to prevent
overheating. If your appliance
cuts out, unplug it from the
mains supply socket and leave
to cool.
7. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal
cut-out, this appliance must
not be supplied through an
external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility company, or plugged
into any socket where the
electrical supply is unstable or
likely to be turned off.
8. When the appliance is used
in a bathroom, unplug it
after use since the proximity
of water presents a hazard
even when the appliance is
switched off. For additional
protection when the appliance
is used in a bathroom, it is
recommended that a Residual
Current Device (RCD), with
a residual operating current
not exceeding 30 mA is
installed in the electrical circuit
supplying the bathroom.
Contact a qualified electrical
installer for advice.
6