Overhead Mounting; Floor Mounting - Chauvet Professional MAVERICK FORCE 1SPOT Manuel De Référence

QUICK REFERENCE GUIDE
EN
Mounting
Before mounting this product, read the Safety Notes. Use at least two mounting points per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Mounting clamp
Safety cable

Floor Mounting

Overhead Mounting

Battery-Powered Display
Press and hold until menu screen appears (approximately 15 seconds).
Followspot Mode
The followspot mode disables the pan and tilt motors, allowing the output of the product to be aimed by hand. To enable
the followspot mode of the Maverick Force 1 Spot, hold <UP> and <LEFT> while the product is powering on. When the
product is turned off and back on, the pan and tilt will return to normal function.
3
Maverick Force 1 Spot QRG Rev. 2