Product Description; General Description; Components And Functional Elements; Scope Of Delivery - Renfert 2200 5000 Mode D'emploi

3. Product Description

EN
3.1

General Description

The LED lights can be easily fitted on all Renfert Mobiloscope models. The illumination of the object
from both sides and the colour of the lamp ensure a high-contrast, non-glare working surface. External
adapter provided for low-voltage power supply.
3.2

Components and Functional Elements

1 LED light fitting
2 Adapter plate
3 On / Off button
4 Power supply socket
5 Fastening screws
1
3.3

Scope of Delivery

1 LED light fitting
1 Mains adapter
1 Mains lead, flat Europlug connector
1 Mains lead, NEMA 1-15P plug
2 Fastening screws
6 Cable ties
1 Operating manual

4. Setting Up

4.1

Unpacking

⇒ Remove the device and all the accessories from the delivery package.
⇒ Check the delivery for completeness (refer to the "Scope of Delivery" section).
The product must be fitted on the Mobiloscope before use.
9
- 4 -
6 Power supply connector
7 Mains adapter
8 Mains input
9 Mains lead
5
4
3
7
8
2
6
Fig. 1