EUROM XVT-16 Livret D'instructions page 23

Step 9 Remove the PVC sleeve of the motor axle.
Step 10 Place the fan blade onto the motor axle. Important! Make sure that the
pins of the motor align properly with the appropriate recesses in the fan
blade.
Step 11 Tighten the plastic spinner (for affixing the fan blade) firmly counter-
clockwise onto the motor axle to secure the fan blade.
Step 12 Check to see that the fan blade rotates properly.
Step 13 Turn the screw of the locking ring almost entirely loose and loosely place
the plastic locking ring with the rear groove around the rear protective
grill.
Step 14 Now mount the rear protective grill in the front groove of the plastic
locking ring and tighten the screw firmly. Both protective grills are now
solidly connected to each other.
Drawing of the parts of XVT-16S
1. Fan blade
2. Motor axle
3. Display housing
4. Display
5. Upper support pipe
6. Nut for height
adjustment
7. Lower support pipe
8. Plastic ornamental
ring
9. Front protective grill
10. Locking system for the
grill
11. Control panel
12. Base
13. Base weight
14. Rear protective grill
15. Motor housing
16. Tilt support plate
17. Side panel
18. Cable with coiled cord
19. Screw with plastic grip
Assembling XVT-16S
Step 1 Remove the packing material and keep it away from children.
Step 2 Before continuing, check that the plug is not plugged into the socket
and the control button is on '0' (off).
Step 3 Remove the nut for height adjustment on the support pipe by turning it
counter-clockwise.
Step 4 Place the plastic ornamental ring onto de support pipe and return the
nut for height adjustment to its proper place.
23