Nameplate; Safety Instructions; Signs And Symbols Used En; Symbol Description - Abicor Binzel FES-2 W3 Mode D'emploi

FES-200 W3

2.5 Nameplate

Fig. 1
The fume extraction system FES-200 W3 is labeled with a nameplate:
When making any inquiries, please remember the following information:
• Device type, device number, year of construction

3 Safety instructions

Please observe the attached safety instructions.
3.1 Classification
The warning signs used in the operating instructions are divided into four different levels and are shown prior
to specific work steps. Arranged in descending order of importance, they have the following meaning:
Describes an imminent threatening danger. If this danger is not avoided, it will result in fatal or extremely
critical injuries.
Describes a potentially dangerous situation. If not avoided, it can result in serious injury.
Describes a potentially harmful situation. If not avoided, it may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or the risk that the work may result in material damage to the
equipment.
3.2 Signs and symbols used
In the operating instructions, the following signs and symbols are used:

Symbol Description

•

1
Nameplate
DANGER
WARNING
CAUTION
List of symbols for action commands and enumerations
Cross reference symbol refers to detailed, supplementary or further information
Action(s) described in the text to be carried out in succession
3 Safety instructions
EN - 5