JVC KD-DV4200 Manuel D'instructions page 36

Problem
iPod is not turned on.
Buttons do not work as
intended.
Sound is distorted.
Playback stops.
No sound is played when
connecting the iPod nano.
"NO MAG" "NO IPOD"
appears on the display.
"NO FILES" appears on
display.
"RESET 1"−"RESET 7"
appears on display.
"RESET 8" appears on
display.
iPod's controls do not work
after disconnecting from
adapter.
About Repeat play/Random play on iPod/D. player
¶ ALL RPT: Functions as "Repeat All" for iPod.
Functions as "Repeat Mode = All" for D. player.
¶ SONG RND/RND ON: Functions as "Shuffl e Songs" for iPod.
¶ Connections are incorrect.
= Check the connecting cable and its connection.
¶ The functions of the buttons have been changed.
= Press MODE before performing the operation.
¶ The equalizer is activated on iPod.
= Deactivate the equalizer on iPod.
¶ The headphones are disconnected during playback.
= Restart playback.
¶ The headphones are connected to the iPod nano.
= Disconnect the headphones from iPod nano.
¶ Connections are incorrect.
= Check the connecting cable and its connection.
¶ No tracks are stored in the iPod.
= Import tracks to iPod.
¶ Communication failure occurs between adapter and iPod/
unit.
= Disconnect adapter from both unit and iPod. Then,
connect it again.
¶ Communication failure occurs between adapter and unit.
= Check the connection between adapter and unit.
¶ Communication failure occurs between adapter and iPod.
= Reset iPod.
Functions as "Random Play = On" for D. player.
Causes/Remedies
35