JVC KD-DV4200 Manuel D'instructions page 30

Menu Item
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN
LANGUAGE
MONITOR TYPE
OSD POSITION
DIGITAL AUDIO
OUTPUT
DOWN MIX
D. RANGE
COMPRESSION
Settings
Select language of DVD menu (P.30 "Language codes").
Select language of playback audio (P.30 "Language codes").
Select language of playback subtitles (P.30 "Language codes").
Select language of setup screen.
You can select 16:9 widescreen playback to fi t your monitor.
¶ 16 : 9 ¶ 4:3 LETTER BOX ¶ 4:3 PAN SCAN
Select to display guidance at the bottom of the setup screen.
(Also when you wish to change the position of the on-screen bar)
¶ 1
PICTURE
MONITOR TYPE 4:3 LETTER BOX
2
OSD POSITION
USE TO SELECT.
SELECT
USE ENTER TO CONFIRM.
ENTER
TO EXIT, PRESS [SET UP].
Guidance displayed
Select according to device connected to DIGITAL OUT terminal.
¶ PCM ONLY : Recording devices such as MD recorders
¶ DOLBY DIGITAL/PCM : Dolby Digital decoder, or compatible
¶ STREAM/PCM : DTS decoder, Dolby Digital decoder, MPEG
Audio decoder, or compatible amplifi er
Select according to device connected to LINE OUT terminal.
¶ DOLBY SURROUND : Dolby Surround decoder or compatible
¶ STEREO : Except for above devices
You can enjoy powerful audio even at low volume levels.
(Only during Dolby Digital playback)
¶ AUTO : Function in use when at least three channels of multi-
channel audio are available
¶ ON : Function always in use
¶ 2
PICTURE
MONITOR TYPE 4:3 LETTER BOX
OSD POSITION 2
Guidance not displayed
(Position of on-screen bar also
moves down)
amplifi er
amplifi er
29