Troubleshooting - Electrolux Precision Steam Guide Du Propriétaire

Troubleshooting

!
For your safety, turn steam mop off and unplug power cord before attempting to resolve problems.
Problem Possible cause
Steam mop will not start. Power plug.
No water in tank.
Needs servicing.
No water in tank.
Steam mop will not
make steam.
Steam mop leaves
Floor cleaning pad
water on floor.
too wet.
Steam mop left standing
Steam mop leaves whitish
in one spot too long.
halo on vinyl floor.
You are using
'hard water.'
For service information in the United States
or Canada, please telephone toll free:
1-800-896-9756
You may also visit us online at:
www.electroluxusa.com (USA) or
www.electrolux.ca (Canada)
6
Solution
Push plug securely into outlet, try another outlet,
or check circuit breaker.
Fill water tank. See page 4, Using your
steam mop.
For service information in United States or
Canada. toll free: 1-800-896-9756.
Fill water tank. See page 4, Using your
steam mop.
Change cleaning pad. If wood floor, dry the floor
before proceeding.
Remove halo with a few drops of vinegar.
Use distilled water instead of tap water.