Steam Mop Special Features; Caring For Your Steam Mop - Electrolux Precision Steam Guide Du Propriétaire

Steam mop special features

Clean burst pedal
A special 'clean burst' feature provides a focused burst of
steam for spot cleaning difficult-to-remove soil.
To use the clean burst feature:
Press clean burst pedal to 'spot clean' position for five to
I
10 seconds. Allow steam burst to spray onto dried spills or
spots (Fig. 1).
Return pedal to 'floor mop' position.
I
Move floor nozzle back and forth to clean soiled area (Fig. 2).
I
Variable steam settings
The steam mop has three settings, so you can select the
steam output appropriate for different floor surfaces (Fig. 3).
Tile: This high setting is best on tile and marble floors.
I
Vinyl: Medium setting for vinyl and linoleum.
I
Wood: Low setting for wood and laminate surfaces.
I
N O T I C E
The steam mop can kill dust mites and some types of
bacteria when used properly. To disinfect a specific area,
position steam mop over the area for a minimum of eight
seconds. This allows the floor under the steam mop to reach
approximately 170 F. Use this procedure to disinfect floors
o
in bathrooms, pet sleeping quarters, etc.

Caring for your steam mop

Unplug and allow steam mop to cool before storing.
I
Always empty water tank after use.
I
Remove cleaning pad after use. Allow steam mop to cool
I
completely, then step on pad lip and lift off mop (Fig. 4).
Wrap power cord and store steam mop in upright position
I
(Fig. 5).
Wash cleaning pads in warm water, by hand or machine.
I
Do not use fabric softener. Lay flat to dry.
Fig. 1
Fig. 2 Fig. 3
Fig.4 Fig. 5
Electrolux Customer Service Helpline 1-800-896-9756
5