Juiceman JM8000S Mode D'emploi page 11

TROUBLESHOOTING
PROBLEM
Appliance will not
start when speed
switch is pressed.
The motor of the
appliance seems to
be struggling.
The juice extractor
has stopped
producing juice.
The juice extractor
is not producing
as much juice as
expected.
Appliance stops
running
POSSIBLE CAUSE
The appliance may not
be assembled correctly.
• Pulp container may be
full.
• Pulp may have
collected under the
cover.
• The speed selected
may not be correct for
the type of produce
you are juicing.
• The juice spout may be
in the closed position.
• The integrated pulp
container or the
stainless steel filter
may be blocked.
High fiber fruits and
vegetables may be
clogging the stainless
steel filter.
Motor may be
overheating
SOLUTION
Check the ASSEMBLING
directions found on
page 6 or page 8.
• Turn the appliance off
and empty the pulp
container. Remember,
the pulp container holds
about 3½ cups of pulp;
do not allow to get too
full.
• Turn off and unplug.
Follow the directions
for disassemblY to take
the lid off. Wash lid
thoroughly and return to
appliance following the
assembly directions
• Hard fruits and
vegetables require speed
2; softer fruits and
vegetables use speed 1.
• Check to see if the spout
is closed ( ) or open(
• Turn appliance off
and unplug. Follow
the directions for
disassembly. Wash all
parts thoroughly and
return to appliance
following the assembly
directions.
Turn off and unplug the
appliance. Follow the
directions for disassembly.
Wash all parts thoroughly
and return to appliance
following the assembly
directions.
Unplug appliance and allow
it to cool approximately 5
minutes before continuing
use.
).
11