Cleaning; Specifications - AKG CU 4000 Mode D'emploi

L
Important!
L
Important!
26

5 Cleaning

1. Disconnect the DC cable from the rear panel DC 12 V jack.
2. Use a cloth moistened (not wet!) with water to clean the surfaces of the charger.
• Never use caustic or scouring cleaners or cleaning agents containing alcohol
or solvents since these may damage the enamel coat or plastic parts.

6 Specifications

Operating voltage:
AC voltage:
Charging current:
Charging time:
Size (LxHxD):
Weight:
This product conforms to the standards listed in the Declaration of Conformity. To order a free
copy of the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com
12 VDC
refer to label on power supply
typ. 1.5 A per charging slot
1 to 17 hours depending on charging cycle
170 x 90 x 85 mm (6.7 x 3.5 x 3.3 in.)
approx. 590 g (1.3 lbs.)
CU 4000