Operation Of The Mcs Ii System; Maintenance - N-Com MCS II Mode D'emploi

4. OPERATION OF THE MCS II SYSTEM

Hook up the cable to the motorcycle, then to the MCS II system. The audio of the
system installed on the motorcycle is now transferred to the helmet.
You can use the interphone system on the motorcycle by connecting both the pilot's
helmet and the passenger's to the motorcycle. Each helmet must be equipped with the
MCS II system.
Volume levels of the radio and of intercom have to be set from the motorbike's audio
system, as desired.
When using the INTERCOM function, the volume has to be set at a comfortable level
for conversation. Do not increase the volume too much to avoid background
interference.
For all audio settings and adjustments, please read your motorbike manual.
Warning: Connect the cables so that they are free and do not hinder riding nor reduce
the freedom of movement, and do not wind them around the limbs, bust or neck. Do
not lock the connectors so that, if necessary, they can be easily disconnected.
Warning: While using the connection cable, always use helmets provided with a visor,
and keep the visor in lowered position

5. MAINTENANCE

The N-Com does not require any special maintenance tasks.
In case you use the kit when it rains, dry off the wet parts of the helmet.
14