Duronic BPM200 Manuel D'utilisation page 159

1. Ensure that the cuff is fitted properly on your arm. Press the
'START/STOP' button to turn on the monitor. The device will
finish the whole measurement automatically.
2. The cuff will inflate. When fully inflated the cuff can feel slightly tight or
uncomfortable. This is normal. If it is intollerable or you have any concerns,
press the 'START/STOP' button to stop the machine and seek professional
medical advice.
Display when cuff inflates
When the pulse is detected, the screen will display the "heart" symbol and flash to
your pulse rhythm.
How to Take a Measurement
3. Your reading is finished. The screen will
continue to display the measurement results,
unless you press 'START/STOP' button to turn
off the machine. Otherwise, the machine will
shutdown automatically after 30 seconds.
The reading measured will save automatically.
To access and scroll through the saved readings,
press the 'MEMORY' button.
159
Display when cuff deflates.