Pioneer SGY-HR500 Manuel De L'utilisateur page 15

• Do not use excessive force pulling or
adjusting while wearing. Doing so may
break the strap and cause an injury.
• Be careful not to bend the electrode
pad. Doing so may cause it to
malfunction.
5. Place the electrode pad
against the chest.
Rotate the strap to adjust the position
of the electrode pad so it attaches
tightly to your chest.
• Attach the strap firmly so it does not
slip down when riding.
Putting the Sensor on Your Body
Confirming Connection to the
Cyclocomputer
After attaching the Heart rate sensor,
pair the sensor with your cyclocomputer.
Refer to your cyclocomputer's ANT+
pairing instructions.
• Pairing with the cyclocomputer may
not be possible due to the influence
of the 2.4 GHz frequency band. If
pairing fails, try again someplace
where there is no interference from
microwaves, radio waves, or wireless
equipment.
EN
15