Makita DVC150L Manuel D'instruction page 12

2. Extend the paper pack.
3. Align the paper pack opening with the dust suction
opening of the cleaner.
4. Insert the cardboard of the paper pack onto the
holder so that it is positioned at the end beyond the
detent protrusion.
1
► 1. Paper pack 2. Holder
Installing the polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
► 1. Holder plate 2. Polyethylene bag
Spread the bag around the top of the tank so that the
cloth filter / prefilter edge can catch and hold the bag
securely.
2
► 1. Cloth filter / prefilter
NOTE: A polyethylene bag available on the
market can be used. 0.04 mm or thicker one is
recommended.
NOTE: Too much dust will tear the bag easily, so
do not collect the dust more than the half of the bag
capacity.
Emptying the polyethylene bag
WARNING:
is switched off, unplugged, and the battery car-
tridge is removed before emptying the polyeth-
ylene bag. Failure to do so may cause an electric
1
shock and serious personal injury.
CAUTION:
float cage and tank. Applying a great impact may
cause deformation and damage to the parts.
CAUTION:
although this depends on picked-up dust volume
in the tank. Or, the suction force will weaken and the
2
motor may be broken.
CAUTION:
ing the tank. Grabbing the hook may cause the hook
to break.
Unhook and lift up the tank cover.
Shake off the dust from the cloth filter / prefilter and then
take the polyethylene bag out of the tank.
12 ENGLISH
1
Always make sure that the cleaner
Do not apply a great impact on the
Empty the tank at least once a day
Do not grab the hook when empty-