Wood's AC Milan Silent 7K WAC703G Guide D'instructions page 15

PROBLEM CAUSE
Unit does not start
Not plugged in / Plug or socket is damaged.
when pressing on/off
button
Fuse broken
Room temperature is lower than the setting temperature.
(Cooling mode)
Not cool enough
The doors or windows are not closed.
There are heat sources inside the room.
Exhaust air hose is not connected or blocked.
Temperature setting is too high.
Air inlet is blocked.
High noise level
The ground is not level or not flat enough
The sound comes from the flowing of the refrigerant inside the
air conditioner
If you are having trouble with your portable air conditioner, please refer to below trouble shooting. If nothing of the
below works, please contact your retailer for servicing of your Air Conditioner.
Error Codes CAUSE
E2 Code
Room temperature sensor failed or is damaged.
E3 Code
Evaporator temperature sensor failed.
E4 Code
Water tank full
Operating Instructions
REMEDY
Plug in or replace the power or socket.
Replace the fuse (3.15A/250AC)
Reset the temperature
Make sure all the windows and doors are closed.
Remove the heat sources if possible
Connect or clean the exhaust air hose.
Reset the temperature
Clean the air inlet.
Place the unit on a flat, level ground if possible
It is normal.
REMEDY
Replace room temperature sensor
Replace evaporator temperature sensor
Please empty the water tank.
GB
15