Template Side #2 (Second Side For Double-Sided Printing) - Brady BSP45 Mode D'emploi

20 Appendix B - Loading Material on PR300+ Printer.

Template Side #2 (second side for double-sided printing)

3. To load the 1" & 2" sleeves and cardstock into the PR300+ to print the second (bottom side),
orient the notch on the edge of the cardstock (marked with the red arrow) away from the interior
wall of the unit. The blue lines on the cardstock should face UP coming off of the roll.
3
4. Print the data onto the sleeves, starting with the data for Sleeve #1.
5. Rewind the roll directly out of the printer so that Sleeve #1 data is at the core. The material is
now in the correct orientation to run on the BSP45, with the last data printing being applied first.
(Example: Printing serialized sleeves 1 through 100, Sleeve #100 will be applied first on the
BSP45)
BSP45 User's Manual
ENGLISH
2/25/16