Rosenbauer HEROS-xtreme Mode D'emploi page 24

Rosenbauer - User Guide HEROS-xtreme
User Guide
HEROS-xtreme Fire fighting helmet
INTRODUCTION
In these instructions for use, we provide you with all the necessary information
on design, employment and care of the HEROS-xtreme fire fighting helmet.
Despite strict quality requirements during the development and production
processes, as well as stringent final checks prior to every delivery, in the final
analysis, the HEROS-xtreme helmets are only as good as the standard of
their handling, maintenance and care. In other words, the extent to which the
HEROS-xtreme can fulfil its protective function and the subsequent degree of
user satisfaction are very much in the hands of the individual fire-fighter.
1. Safety instructions and fire fighting helmet applications
1.1 The HEROS-xtreme fire fighting helmet may only be used for the purposes
for which it has been designed after careful study of the complete instructions.
The helmet is to be employed exclusively for operations according to fire
fighting guidelines and standard practice.
The helmet is neither suitable nor certificated for uses, e.g. as a cycle helmet,
motor cycle helmet, as a seat, as an object for standing on, or similar activities.
Utilisation for such purposes is unacceptable and forbidden.
WARNING: Improper use of the helmet for purposes other than
those permitted can lead to serious injury!
1.2 The HEROS-xtreme fire fighting helmet must be handled, checked
and maintained in the manner described in this user information and the
instructions for use. In order to safeguard the HEROS-xtreme helmet against
premature ageing, store it in a place, which offers maximum protection against
light and moisture (e.g. wall cupboard, etc.).
1.3 All repair work, component exchange and servicing on the HEROS-xtreme
fire fighting helmet may only be undertaken according to the appropriate
guidelines pursuant to these instructions for use. All activities must be logged.
Only specialists authorised by ROSENBAUER may carry out fundamental
maintenance and servicing work, not described in this user information.
24 24