Num'axes PIE1027 Guide D'utilisation page 19

PIE1027 – indice C - Avril 2019
2-2 Video length
1. 10 seconds
2. 20 seconds
3. 30 seconds
4. 60 seconds
Sets length per captured video clip.
NOTE: You need to double the time interval from what your video is
set on. Example: 20 seconds video length, your PIR interval needs to
be at LEAST 40 seconds.
3-7 Timer
1. ON
Start:
End:
2. OFF
When "Timer" is set to ON, the camera can be set to work only at a
certain time of the day. The rest of the time, the camera will not work.
Select ON then press OK" to set the beginning time and end time
(hour:minute). Each day, the camera will only work during the time
period user set.
Example: If pre-set working timer is 15:00-18:00; camera will only
work between 15h00 (03:00 PM) and 18h00 (06:00 PM) each day.
This function can be set to "OFF" which means the camera
works all day.
4-7 Time Lapse
1. ON
00:00
HH:MM
2. OFF
"Time Lapse" means the camera can capture images or videos
automatically at a pre-set time interval regardless of whether motions
are detected or not. The camera will take photos or videos
automatically at given time interval.
Select ON then press OK to set the time interval; the camera will
shoot pictures or video clips automatically upon the interval user set.
Example: if pre-set Time Lapse is 00:30, the camera will
automatically capture photo/video every 30 minutes.
00:00
00:00
HH:MM
19/56