Unpacking The Machine; Lifting And Handling; Overall Dimensions; Machine Identification Data - Marpol 4300 Manuel D'instruction

Table des Matières

Publicité

2.3 DISIMBALLO
Al momento del disimballo verificare che la
confezione contenga le parti descritte; il Co-
struttore non risponde di anomalie o parti mancan-
ti dopo cinque giorni dalla spedizione.
Il materiale componente l'imballo dovrà es-
sere smaltito secondo le vigenti normative
sulla protezione ambientale.
2.4 SOLLEVAMENTO E MOVIMENTAZIONE
Il sollevamento e la movimentazione vanno
eseguite utilizzando un transpallet.
2.5 DIMENSIONI D'INGOMBRO
NOTA
- Le dimensioni d'ingombro ed i pesi sono dedu-
cibili dai valori degli imballi (P. 18).
2.6 DATI D'IDENTIFICAZIONE DELLA MACCHINA
• La targa (A) riporta le caratteristiche elettro/mecca-
niche ed i dati per l'identificazione della macchina.
Mantenere sempre pulita quindi, leggibile la
targa con i dati d'identificazione che non de-
vono assolutamente essere alterati o modificati, per
nessuna ragione.
2.7 DATI TECNICI
HP
V400 - Hz60
1,7
2,3
T. 7
• Albero conico porta utensili: Ø 30 mm
2.8 RUMOROSITÀ: dBA 105
(è obbligatorio l'uso delle cuffie di protezione
acustica individuale).
MARPOL - mod. 4300
A
F. 2
2V
Rpm
m/sec.
1400
18
2800
36

2.3 UNPACKING THE MACHINE

When unpacking the machine, make sure that
the package contains the parts described; the
Manufacturer shall not be held responsible for
errors or missing parts following five days after
delivery.
The packing material must be disposed of
according to current environmental
protection regulations."cemented" steel parts.

2.4 LIFTING AND HANDLING

Whenever lifting or handling, use a
transpallet.

2.5 OVERALL DIMENSIONS

NOTE -
The overall dimensions and weight can be in-
ferred by the correspondign package dimensions (P. 18).

2.6 MACHINE IDENTIFICATION DATA

• Electrical and mechanical features are reported on
the model plate (A) along with the machine
identification data.
Always keep the model plate clean so that the
identification data may always be read.
Identification data may not be altered or changed
for any reason.
2.7 TECHNICAL FIGURES
F. 3
• Tool carrier tapered shaft: Ø 30 mm
2.8 NOISE: DBA 105
(always use safety headset).
20/60
2
F
G
I
350 200 400
T. 8

Publicité

Table des Matières
loading

Produits Connexes pour Marpol 4300

Table des Matières