Denon DHT-T110 Manuel De L'utilisateur page 11

Coaxial Digital In - BETTER
If your television lacks an optical digital out it will probably include a coaxial digital output. Use an "RCA"-type cable (not
included) to connect your television's coax digital audio output to DHT-T110's Coaxial Digital In. Other components con-
nected to the television, such as a DVD/Blu-ray player or cable/satellite tuner, will automatically play through DHT-T110.
Television rear panel
DIGITAL AUDIO
COAXIAL OUT
Analog In 1/8" (3.5 mm) mini plug analog audio - GOOD
If your television has no digital audio outputs, connect its analog stereo audio output using the supplied 1/8" (3.5 mm) stereo
cable; if this output is in the form of dual RCA jacks (typically red for right and white or black for left), use the supplied adapter.
If no other audio output is available, connect the set's headphone jack to the analog input using the supplied cable.
Television rear panel
AUDIO
OUTPUT
RCA to a stereo
1/8" (3.5 mm) adapter
Important Note: Input Sensitivity (Analog Input Only)
The normal setting for this is "0 dB. " In rare cases a television' s analog audio output may be too strong. Should you hear
distorted, harsh, or "buzzy" sound from DHT-T110 via its analog stereo input, adjust the rear panel Input Level switch if you
continue to hear distortion.
If you connect multiple inputs to DHT-T110, the DHT-T110 will automatically select the one with the highest priority. For example,
if optical and analog ins are both connected with live signal, optical will play through the DHT-T110. If the optical source is
turned off, the DHT-T110 must be powered off and then back on in order to detect a different audio input.
DHT-T110E3_140805.indd 11
DHT-T110 rear panel
DENON
DHT-T110 rear panel
DENON
1/8" (3.5 mm) stereo cable
DHT-T110
DHT-T110
11
2014/08/05 10:41:27