Xoro HRT 8300 Manuel D'emploi page 71

Installation
Channel Scan
If you want to search programs on a certain channel or frenquency, please choose Channel Scan.
Seach By Channel
Scan Band Choose the band (UHF/VHF) in
which the programs are broad-
casted.
Ch No. Choose the channel to be sear-
ched.
Frequency -
Bandwidth -
You can judge from the bars on bottom of the page showing signal intensity and quality whether
there is broadcast on the chosen channel and frequency.
Move the cursor with ▲/▼ to „Search" and press OK to start the scan.
Aerial Adjustment
Ch. No.
Select a channel number. The signal intensity and quality will be displayed. This helps to orientate
the antenna.
DVB-T Ant. +5V
If the antenna relies on the power supply of the receiver, selet „On". Otherwise this option will have
to remain „Off".
LCN (Logical Channel Numbering)
If the LCN is activated, the programs will be sorted according to criteria of the broadcasters during
the scan.
LCN is not available in Germany. Please keep this option „Off".
Settings
By Frequency
-
-
Input the frequency to be searched.
Choose the bandwidth of the
broadcaster.
HRT 8300
ENG 31