Personal Safety; Special Safety Instructions - Volpi KV360 Mode D'emploi

• Read manual before using the tool, select suitable tools and right accessories to avoid injury.
3.4. Battery-Operated Tool Precautions
• Use only the charger specified by the manufacturer. Use of other charger can damage the battery
and cause risk of fire.
• The tool is only designed for original battery. Using other battery to match the tool can cause damage
and risk of injuries.
• Battery should be stored away from metal parts, like clip, coin, key, nail, screw or other small metal
parts. Short circuit the battery will cause fire.
• Inappropriate usage will cause leakage of liquid. If your body is splashed by the liquid, please flush by
clean water. Must see a doctor if liquid touches eyes. Liquid of battery will canker or burn.

3.5. Personal safety

• Be awake, alert and pay close attention during the operation of power tools. Do not operate the
power tool when you are tired, intoxicated or on medication. Falling asleep or losing consciousness
during in the operation of the power tool can result in serious personal injury.
• Use personal protective equipment. Always wear goggles and safety equipment such as dust masks,
non-slip safety shoes, hard hats, hearing protection, etc. Wearing safety gear in appropriate
conditions can reduce personal injury.
• Inserting the plug when the tool is plugged in or when it is turned on can be dangerous.
• Remove all adjustment keys or wrenches before the power tool is on. A wrench or key left on the
moving parts of the power tool can cause personal injury.
• Do not overextend your reach and lose balance. Always pay attention to your foothold and body
balance. This allows for good control of the power tool especially during unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep clothing, gloves and hair away from
moving parts. Wearing loose clothes, accessories, or long hair may get caught in moving parts.

4. Special Safety Instructions

4.1. Pruning shear special safety instruction
• Keep anybody away at least 1.5m from the blade, Do not move cutting parts at blade working.
Keep any part of your body away from the blade at least 15cm. Carefully operate the equipment
can avoid injury.
• Move the tool at blade not moving. Protection guard is must at storage the tool. Protect blade to
reduce damage.
28