Configuration Settings - Greenlee 5882A Manuel D'instructions

Configuration Settings


Pressing and holding the SET-UP button for longer than 2 seconds lets you change
configuration settings on the instrument. You can then use the p and u buttons to
> 2s
scroll through and modify parameters.
In Set-Up mode, the p button performs the following functions:
Indicator Table
1 press
st
on p
2 press
nd
on p
3 press
rd
on p
4 press
th
on p
5th press
on p
6th press
on p
The alarm buzzer is active. To deactivate it:
1. Press u. On will blink to indicate it is selected.
2. Press p to change the setting to OFF.
3. Press u to validate the change.
The symbol disappears from the display when you exit
SET-UP. Note that this setting reverts to On when you turn OFF
the instrument.
Automatic switching to standby mode is activated. To deactivate it:
1. Press u to select OFF (the setting blinks).
2. Press p to change the setting to On.
3. Press u to validate the change.
The symbol appears on the display when you exit SET-UP.
P
Note that this setting reverts to OFF when you turn OFF
the instrument.
Displays the instrument model number.
Displays the instrument firmware version.
Displays the instrument hardware version.
Return to the first press.
5882A
19