Greenlee 5882A Manuel D'instructions page 15

Insulation Measurements (cont'd)
5. The resistance measurement is displayed on the LCD's main display area and on the bar graph.
The secondary display area indicates the test voltage generated by the instrument.

> 1s
TEST
The symbol
6. At the end of the measurement, release the TEST button. The instrument stops generating the test
voltage and discharges the device being tested. The symbol
the system under test has fallen below 70V.
Note: Do not disconnect the leads and do not start any measurement while the symbol
is displayed.
When you release the TEST button, the measurement results remain displayed until the next
measurement, or the HOLD button is pressed, or the instrument is turned OFF.
indicates that the instrument is generating a hazardous voltage (> 70V).
M
G V
M
is displayed until the voltage on
5882A
15