Kärcher PC 20 Mode D'emploi page 9

duced physical, sensory or
mental capabilities.
The appliance must not be
operated by children or per-
sons who have not been in-
structed accordingly.
Children should be super-
vised to prevent them from
playing with the appliance.
 Maximum water temperature
60 °C (please observe the in-
structions of your high pres-
sure cleaner).
 The cleaning sled can be-
come detached from the roof
gutter during operation. Keep
all persons and objects clear
of the danger zone.
Applicable only for Germany:
DANGER
 When cleaning the insides of
pipes with a hose line, the ac-
cident prevention regulation
BGR 500, Chapter 2.3.6 must
be adhered to!
Roof gutter cleaning set
Description of the Appliance
Illustration
1 Adapter to connect to the high pressure hose to the
cleaning sled
2 High pressure hose (pipe cleaning hose)
3 Red mark
4 Cleaning sled
5 Red high pressure nozzles (2 pieces)
6 Grey high-pressure nozzles (2 pieces)
7 Clamping unit with hose guide
8 Sieve to cover the drop pipe
Preparing the Appliance
Installing the nozzles
Illustration
Select the nozzles to match the high pressure cleaner
used.
K1
Red
K2
Red
K3
Grey
K4
Grey
K5
Grey
K6
Yellow
K7
Yellow
Note: At delivery, the yellow nozzles are preinstalled.
 Remove the clips
 Pull out the unneeded highpressure nozzles.
 Select the high pressure nozzles needed to match
the high pressure cleaner used and press them in.
 Secure with clips.
Install the adapter to the high pressure hose and
connect the cleaning sled
Illustration
 Screw the brazen adapter onto the high-pressure
hose.
Use open-ended spanner SW12.
Illustration
 Insert the high pressure hose into the hose guide of
the clamping unit as shown.
Illustration
 Press the adapter with the high pressure hose into
the cleaning sled intake, secure with clip.
 Press the high pressure hose into the fixing of the
cleaning sled.
– 2
EN 9