Nobles TIDY-VAC 3e Manuel De Fonctionnement page 5

Preparing Machine for Operation:
1.
Release the latches (Fig. 1) and remove the lid (Fig. 2) to ensure that the dust bag and cloth filter are installed (Fig. 3 & 4).
To install the dust bag, simply lift out the secondary cloth filter (Fig. 3) and slide the dust bag opening over the air entrance
connector (Fig.5). NOTE: The seal around the dust bag opening should cover the air entrance connector inside
the housing.
Replace the cloth filter and lid and lock the lid down with the two latches (Fig. 6 & 7)
2.
Insert the vacuum hose into the base of the machine by turning the hose clockwise until it is secure (Fig. 8 & 9).
1
4
7
Nobles Tidy-Vac 3e (11-2016)
2

5
8
English
3
6

9
EN

5