Bluetooth ® Pairing - Hama MyVoice1300 Mode D'emploi

6. Bluetooth pairing
®
Note - Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your device .
The headset and the device should not be more than 1 metre apart .
The shorter the distance, the better .
Switch the headset on using the On/Off switch (1) .
Check the status of the status LED (3) and the announcements
1
white
"Pairing"
white "Connected"
® -capable device is switched on and that Bluetooth
If the LED (3) is flashing quickly and the announcement is:
Headset searching for a Bluetooth
If the LED (3) is flashing slowly and the announcement is:
The headset is already paired with a Bluetooth
® is activated .
connection .
®
device .
®
7