5. Charging
Fully charge the headset once before using it for the first time .
1
Switch off the headset and connect it
2
Headset charging process
The status LED (3) lights up solid red during the charging process .
Once the charging process is complete, the LED (3) lights up white .
It can take up to 2 hours for the battery to be fully charged .
CHARGING
3
Battery capacity
When the headset's battery capacity is low, the LED (3) flashes red and the announcement
"Battery Low" is heard .
Note
If you have not used the product for a few months, it can take up to 15 - 30 minutes until the
status LED (3) lights up red during the charging process .
Ensure that the headset is switched off before charging it .
Place the headset in the charging tray (8) . Connect the USB
plug (11) to a suitable USB charger . To do this, consult the
operating instructions for the USB charger you are using .
USB
docking
2
:00
h
m
red
CHARGED
white
6