Pulse Generators/Encoders; Installation And Commissioning; Scope Of Delivery - Honeywell Elster SM-RI-X Série Mode D'emploi

Honeywell

2.5 Pulse generators/Encoders

The meter may be fitted with the following pulse generators or encoders:
Device type:
Low-frequency pulse generator (LF)
Low-frequency pulse generator (LF)
High-frequency pulse generator
(HF)
Encoder
Table 2 | Overview of pulse generators
Further information on the pulse generators and encoders is provided in
the separate instruction manuals.

3. Installation and commissioning


INFORMATION!
Check the packing list to ensure that you have received your
complete order. Check the type labels to ensure that the device
supplied is the one you ordered.

INFORMATION!
Check the packaging carefully for signs of damage or signs that
the device has been handled incorrectly. Report any damage to the
forwarding agent and to the local representative of the
manufacturer.

INFORMATION!
The installation material and tools are not supplied with the device.
Use installation material and tools which comply with current
health and safety regulations.

3.1 Scope of delivery

 Ordered measuring instrument
 Instruction manual
 Product documentation
 Oil – Klüber Isoflex PDP 38 (for meters lubricated with oil)
 Syringe and hose (for meters lubricated with oil)
 Optional accessories depending on the purchase order
 Optional: calibration certificate
18
Manufacturer:
Elster GmbH
Elster GmbH
IFM
Elster GmbH
73024521a © Elster GmbH | All rights reserved. Subject to modification
Device designation:
IN-Sxx
Sxx-Rx
N95000 (A1S)
ENCODER S1