Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.2.

Terms of use

➔ We recommend using our strobes / navigation light Raylight at a temperature
between -40° and 70°Celsius.
➔ The voltage must not exceed 20 volts.
➔ The correct cable cross-sections must be used according to the technical
specifications (from 0.25 to 0.75 mm², 0,5mm² recommended).
➔ Thoroughly verify that the cables that are being used are in good shape: not cut
nor damaged.
➔ The electrical connexions are carried out by connectors that need cable stripping
to be connected.
Strictly follow the assembly instructions: strip at 0.8mm and pay careful attention
to the « rebel » strands.
➔ Raylight is in no way shape or form responsible for the mounting of the device
and it is strongly advised to consult with professionals for the assembly.
The generator has to be protected from:
➔ Moisture: exposed to an environment inferior to 80% of humidity level.
➔ Water: sheltered from rain, sprinklers etc..
➔ Heat: the generator must be placed in a room temperature of 85°Celsius/185°
Fahrenheit/358,15° Kelvin.
NB: The generator lifetime can be improved if the surrounding temperature is 65°
Celsius (85° Celsius in use : the lifetime increases to 5,000 hours).
➔ Flammable or explosive materials: 1meter minimum taken into consideration
between the source and the generator.
➔ Heavy mechanical stress: vibrations, twists, inflections, shears etc... that may
cause rupture of the support resulting in damage of the generator
➢ risks of electrical short-circuits.
Limatech SAS
31 Chemin de la Crabe
31300 Toulouse
FTECH-2021-000003
Last Update: 15/09/2021
Page 4 / 34
V4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aircraft hermesAircraft hera

Table des Matières