Surface Burner Warnings - Samsung NX58 4311S Serie Manuel D'utilisation

Important safety instructions
Never leave surface units unattended at high heat settings.
Boilovers cause smoke, and greasy spillovers could ignite.
Do not use a flame to check for gas leaks. Instead, use a
brush to spread a soapy water mixture around the area
you are checking. If there is a gas leak, you will see small
bubbles in the soapy water mixture at the point of the
leak.
Do not place portable appliances, or any other object other
than cookware on the cooktop. Damage or fire could occur
if the cooktop is hot.
Do not attempt to operate this appliance if it is damaged,
malfunctioning, or has missing or broken parts.
Never place plastic, paper, or other items that could melt
or burn near the oven vents or any of the surface burners.
If the self-clean mode malfunctions, turn the oven off and
disconnect the power supply. Refer to pages 65 and 68 to
contact a qualified service technician.
There can be slight popping sound during oven cooking.
SAVE THESE INSTRUCTIONS
8 English
Steam and Vapors
Use care when opening the oven door. Let hot air or steam
escape before removing or placing food in a hot oven.
Use only dry pot holders. Putting moist or damp pot
holders on hot surfaces may result in burns from steam.

Surface Burner Warnings

• The burner head can be blocked by food or dust. Clean
the head if it appears blocked. If you clean the head
with water, assemble it only after it is completely dry.
If the head is wet, it might prevent the burners from
igniting.
• Do not pour water on the cooktop for cleaning. It can
get inside the range and cause the parts inside to rust.
• Only ignite the cooktop burners with the burner caps
in place. If the burner caps are not in place, you can
damage the controls or cause an unintended large or
dangerous flame.