Samsung NX58 4311S Serie Manuel D'utilisation page 58

Maintaining your appliance
How to cancel self-cleaning
You may find it necessary to stop or interrupt the self-cleaning cycle due to
excessive smoke or fire in the oven.
The oven will turn off. The Lock icon will blink under the current time of day on
the display. When the oven temperature falls below 392 °F (200 °C), the oven door
unlocks and the Lock icon turns off.
58 English
5. Press the START/SET Pad.
The display will show the Delay Start
time and the Lock icon. The oven door
lock will engage automatically.
When the start time is reached, the oven
will turn on automatically and start the
programmed cleaning cycle.
• Press the OVEN OFF pad.
After self-cleaning
CAUTION
Be careful opening the oven door after a self-cleaning cycle. The oven is still very
hot when the door unlocks. Escaping hot air and/or steam could burn you.
• The internal oven temperature must be below 392 °F (200 °C), for the
automatic door lock to disengage. The door lock must be disengaged before
another cooking function can be set.
• After the oven has cooled, wipe down the oven surfaces with a damp cloth to
remove any ash residue.
• Stubborn spots can be cleaned with a soap-filled steel-wool pad. Lime deposits
can be removed with a cloth soaked in vinegar. Rinse thoroughly after
cleaning.
• If the oven is not clean after one cycle, repeat the cycle. If the oven is still hot,
HOT will appear on the display until the oven is cool enough to start a new
cycle.
• Self-cleaning does not operate within 2 hours after running the self-cleaning
cycle.