Samsung NX58 4311S Serie Manuel D'utilisation page 57

3. Press the START/SET pad to start the
cycle.
The display will show Clean and the
selected cleaning cycle time, and the
Lock icon will blink until the door is
locked. Then the Lock icon will stay
on until the cycle is over and the oven
temperature is below 392 °F (200 °C).
The oven temperature will rise and hold
the preset self-clean temperature for the
duration of the selected cleaning cycle.
The display will count down the cleaning
cycle in minutes and hours.
When the time elapses, the oven will
turn off and beep 6 times. End will show
in the display and the Lock icon will
blink. When the oven temperature falls
below 392 °F (200 °C), the door unlocks
and the Lock icon turns off.
4. Press the OVEN OFF pad.
The display will go back to showing the
time of day.
How to delay the start of self-cleaning
1. Make sure the oven door is completely
closed.
2. Press the Self Clean on the oven control
panel.
Press the pad once for a 2-hour cleaning
cycle, twice for a 3-hour cleaning cycle,
or three times for a 4-hour cleaning
cycle.
The display will show Clean.
3. Press the Delay Start Pad.
The display will show Delay and -- --.
4. Press the number pads to set the time
you want the oven to turn on, e.g., 4,
3, 0.
English 57