Volume Setting; Power Save Mode; Factory Default Setting - Cino CN-Z01 Manuel D'instructions

7

Volume setting

Insert your
DISC/POD
or
Hold on the big or
small cup button
8

Power save mode

After restoring the factory
settings, the small cup button
flashes continuously for 5s
9

Factory default setting

Switch OFF
10
Warning
Warning for short of water: when the water tank is out of water during work, the machine automatically alarm.
Press down the
handle
Select till to the setting
volume after released
Press the big cup button twice within
5s, switch the time of power saving
mode freely
Both the cup buttons blink: after 15 mins
The small cup button blinks: no power save mode
The big cup button blinks: after 30 mins
Press and hold big
cup button
6
3s
In standby, press both
the cup buttons for 3s
Both buttons blink 2
times per seconds
Switch ON