Technical Parameters - Cino CN-Z01 Manuel D'instructions

14
Trouble shooting
a
No light
b
No coffee,
No water
c Coffee is not
hot enough
d The lever can not
be closed completely
e
Leakage or unusual
coffee flow
f
Lights flash irregularly
g
Water comes out
No coffee

Technical parameters

AC220-240V 50-60Hz
......
1300-1500W
......
......
kg
Please search user manual at www.cino.cn
The machine has switched off automatically: press ON/OFF buttons.
Check the mains: plug, voltage, fuse.
Check the water tank if empty, full with potable water. Descale it if necessary.
Lift the lever. Press one button and wait until water comes out.
Preheat cup. Descale the machine if necessary.
Empty the capsule container/check there is not DISC/POD
blocked inside the machine.
Check that the water tank is in position.
Check the water tank if empty, full with potable water.
Replace a new DISC/POD.
Exit descaling procedure ( see paragraph on descaling ).
Power save activates after 15mins of non-use.
Replace a new DISC/POD.
......
...... ...
......
10