Empty System - Cino CN-Z01 Manuel D'instructions

3s
Press the big cup
button for 3s
3s
Press the big cup button
once again for 3s
3s
Press the big cup
button once again
for 3s
5

Empty system

Switch off
.
Both the cup buttons indicator flashes
twice each 2s, enter the pre-infusion
mode for 1.5s
Both indicator flashes three times
each 2s: enter the pre-infusion mode
for 3.0s
Both indicator flashes four
times each 2s restore to
default no pre-infusion mode
During this process, if the DISC/POD container is taken out, the both cup buttons blink in
turn , and the emptying system will be paused and the emptying process continues after
the disc putted until the emptying system is completed.
Press small cup button & switch
on simultaneously
To exit: Switch off or
plug off mains
4
3s
Press the both cup button once
again for 3s : to save the setting
And two cup buttons blink in turn
The buttons blink 1 time per
second in turn