Wiring The Grafik Eye Qs Control Unit Overview Of Line Voltage/Mains Wiring - Lutron GRAFIK Eye QSGRJ-3P Guide Rapide D'installation

Wiring the GRAFIK Eye QS Control Unit:
Overview of Line Voltage/Mains Wiring
Line Voltage/Mains Cables and Load Wiring
Terminal labels:
L: Hot/Live
N: Neutral
: Ground
1– 6: Dimmed/Switched line voltage outputs
12 AWG (4.0 mm
* For a complete list of approved dimmable LEDs, please visit www.lutron.com/dimcflled or
call 1.844.LUTRON1.
1 2 3 4 5 6 L N
2 ) each terminal
For additional information, see the complete installation and operation guide at www.lutron.com/qs
GRAFIK Eye QS Control Unit Quick Installation and Operation Guide
1 2 3 4 5 6 L N
Dimmable LED bulb*
Power module or interface
120 – 127 V~
or
220 – 240 V~
Distribution Panel
Load controlled by
power module or
interface
3