Ground (Earth) - Sartorius Midrics Option Y2 MIS1 Serie Manuel D'installation Et De Sécurité

Ground (Earth)

§ The display and control unit must be grounded.
To do this, connect the grounding conductor to the ground terminal.
Installation:
– Toothed lock washer
– Cable
– Toothed lock washer
– Nut
– Locknut
§ The display and control unit must also be grounded.
To do this, connect the grounding conductor to the ground terminal.
Use a locknut if necessary.
Connecting the Scale to AC Power
Make sure that the voltage rating printed on this unit is identical to your local line
!
voltage. If the voltage specified on the label does not match the rating or standard you
use, please contact your Sartorius office or dealer.
! Make sure to observe the safety instructions.
§ Connect the equipment to AC power.
7