Adam Equipment HIGHLAND Serie Mode D'emploi page 28

Connection details are:
RS-232 Connector: 9 pin d-subminiature socket
Pin 3 Output
Pin 2 Input
Pin 5 Signal Ground
USB Connection is using a standard USB connector.
Software for using the USB interface with a PC is available from the Adam
Equipment web site.
Data Format for normal weighing operations, parts counting or recalling of totals
from memory will all be different. All lines end with a carriage return and a line
feed, (0dH and 0aH in ASCII).
Format 1 Output:
The lines will include a heading for each line then the value. A typical output when weighing is
shown below. 3 lines of data are printed followed by 2 blank lines.
G S _ _ _ _ _ _ 1 2 3 . 4 5 _ g _ <cr> <lf>
N o . _ _ _ _ _ _ _ _ _ 0 1 <cr> <lf>
T o t a l _ _ _ 1 2 3 . 4 5 _ g _ <cr> <lf>
<cr> <lf>
<cr> <lf>
When the scale is at zero the weight is not printed, only the number of items and total are printed.
If the scale is set for continuous output the weight only is printed followed by 2 blank lines. And
example of continuous output is shown below.
G T , N T ± _ _ _ _ _ 1 2 3 . 4 5 _ g _ <cr> <lf>
<cr> <lf>
<cr> <lf>
22 Characters, ST for stable/US for unstable followed by GS for Gross Weight/ NT for Net Weight and then a minus sign for negative weight, or a
space for positive weight.
© Adam Equipment Company 2014
Generally a Null model cable is
required
computer or printers.
19 ASCII Characters, GS for Gross Weight, NT for Net Weight
16 ASCII Characters, Increments every time a weight is stored in memory
19 Characters, The total weight stored in memory
Includes 2 blank lines
Includes 2 blank lines
26 9520revF-Jun14
for connection to a