Filling With Water; Filling The Coffee Bean Container; Switching On For The First Time - Electrolux CG 6600 Mode D'emploi

g
6.2

Filling with water

Before switching on, always make sure
that there is water in the water tank
and top up if necessary. The appliance
needs water for the automatic rinsing
processes every time it is switched on
or off.
0 Take the water tank out of the appli-
ance (Figure 7).
0 Fill the water tank with fresh cold
water. Never fill the tank beyond the
MAX mark.
Only fill the water tank with cold
3
water. Never fill it with other liquids
such as mineral water or milk.
0 Put the water tank back in (Figure 7).
Make sure that you press the tank
firmly into position so that the valve
on the water tank opens.
To ensure good, aromatic coffee at all
3
times, you should:
• change the water in the water tank
every day,
• clean the water tank with normal
water for rinsing (not in the dish-
washer) at least once a week. Then
rinse off with fresh water.
6.3

Filling the coffee bean container

0 Flip open the cover of the coffee bean
container and fill it with fresh coffee
beans (Figure 8). Then put the cover
back.
Warning! Make sure that no foreign
1
bodies, such as stones, get into the
bean container. Damage caused by
foreign bodies in the mill mechanism
is not covered by the guarantee.
The mill mechanism is set at the factory
3
to a medium grind level. If necessary,
you can change this setting. You can
find how to change the grind level
under „Setting the grind level" page 50.
The grind level can only be changed
1
during the milling process. Changing
the settings when the mill mecha-
nism is at rest can damage the coffee
machine.
42
All manuals and user guides at all-guides.com
The coffee machine was tested at the
3
factory. Coffee was used to do this, so
it is completely normal to find some
coffee in the mill mechanism. It is defi-
nitely guaranteed that this coffee
machine is new.
6.4

Switching on for the first time

When you operate the appliance for
the first time, the automatic switching
on process will only proceed if you
have selected the desired language.
0 Switch the appliance on using the
main switch at the back of the appli-
ance (Figure 9).
In turn the display shows the text
«PRESS MENU TO CHOOSE
ENGLISH» in all available languages.
0 Wait until the desired language is dis-
played. Then press the "MENU" button
to confirm (Figure 5) and keep pressing
on it until the display shows
«ENGLISH INSTALLED»
After installing the appliance for the
3
first time, you can change the lan-
guage at any time, see „Setting the
language" page 50.
After choosing the language the dis-
play shows «FILL TANK !».
0 To fill water tank, see „Filling with
water" page 42.
0 Put the water tank back in (Figure 7).
Make sure that you press the tank
firmly into position so that the valve
on the water tank opens.
The display now shows:
«INSERT WATER SPOUT
AND PRESS MENU KEY»
0 Insert the hot water nozzle (Figure 10)
and place a cup underneath.
0 Press the "MENU" button (Figure 5).
After a few seconds some water comes
out of the hot water nozzle and a
progress bar is displayed. When the cup
is filled with about 30 ml of water, the
progress bar is completed.