Zeegma Handig Manuel De L'utilisateur page 7

Troubleshooting:
PROBLEM
The steamer fails to heat up
The steamer fails to generate steam
Leaking water tank
During operation, loud buzzing or
pumping sounds are emitted
Water gushes from the steam outlet
Note!
Do not use the steamer directly on metal clothing items as it may cause them to
fade. If there are any metal accessories on the clothes, be careful when using the
steamer.
The pictures are for reference only. The real design of products may
Make sure the plug has been inserted
•
properly.
Make sure it is supplied with power.
•
Check power key on the product.
•
Check water level in the water tank.
•
Make sure the water tank has been
•
fixed properly.
Press the steam switch firmly.
•
Keep the dish vertically or horizontally
•
(if you hold the dish horizontally: make
sure that the end of the hose in the
tank is submerged in water.
Make sure the permissible water level
•
in the tank has not been exceeded.
Make sure the water inflow in the
•
tank has been fixed properly.
Keep the dish vertically or horizontally
•
(if you hold the dish horizontally: make
sure that the end of the hose in the
tank is submerged in water.
Check water level in the tank. If water
•
is insufficient or missing, pour water
into the tank.
When steamer is not hot yet, press
•
power key and then let the machine
heat up for 40 seconds – then press
the steam switch.
differ from pictures presented.
SOLUTION
EN