System Settings - Roadstar HIF-1898D+BT Manuel D'instructions

3 English
TO USE THE RADIO
1. Press the [POWER] button (2) to turn ON the unit;
2. Select the desired audio source by pressing the [FUNCTION] button (4);
3. (Please see detailed instructions for each Source in the following chapters);
4. Adjust the volume with the [VOLUME KNOB] (3) to the desired level;
5. Press and hold the [POWER] button (2) to turn OFF the unit.
Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.
NAVIGATE INTO THE MENU
In FM / DAB mode there is an option menu.
1. Press [MENU] (7) to access to the options.
2. Turn the [TUNING KNOB] (19) to navigate into the options.
3. Press [ENTER] (19) to select the options.
4. Press [MENU] (7) to exit the menu.

SYSTEM SETTINGS

In FM / DAB mode, press [MENU] (7) and use [SKIP -/+] (15/16) or [TUNING KNOB]
(19) to select "SYSTEM";
Time: To set the desired time option:

Set Time/Date;

Auto Update;

Set 12 / 24 Hours;

Set Date Format.

Language: select this option to change the system language.

Software Upgrade: select this option if a new software version is released.

SW version: select this oprion to see the current software version.

CLOCK AND DATE SETTING
In DAB / FM mode:
1. press [MENU] (7);
2. Use [SKIP -/+] (15/16) or [TUNING KNOB] (19) to select "SYSTEM";
3. Confirm with the [ENTER] button (19);
4. Use [SKIP -/+] (15/16) or [TUNING KNOB] (19) to select "TIME";
5. Confirm with the [ENTER] button (19);
6. Use [SKIP -/+] (15/16) or [TUNING KNOB] (19) to select "SET TIME / DATE";
7. Confirm with the [ENTER] button (19);
8. Use [SKIP -/+] (15/16) or [TUNING KNOB] (19) to adjust the hour;
9. Confirm with the [ENTER] button (19);
10. Use [SKIP -/+] (15/16) or [TUNING KNOB] (19) to adjust the minutes;
11. Confirm with the [ENTER] button (19);
12. Repeat steps 10 and 11 to set the date.